MULTI-CAST® Urethane Shaft Pig

Manufactured from MAXITHANE®,  Inline’s high performance polyurethane, the MULTI-CAST® Pig is available in a comprehensive range of sizes and configurations. Mix or match components to meet requirements. Select only the parts needed for a single run, or use interchangeable components to reconfigure the MULTI-CAST pig for a multiple uses. One man working alone can assemble/reconfigure all but the largest units with a hammer in just a few minutes. The urethane shaft and rear flange are molded in one piece. All cleaning cupsdiscsmagnetsbrushes and other accessories stack in front so friction and head pressure force them back onto the shaft. Even if the retaining nut were left off, the MULTI-CAST won’t come apart. The center post is designed with rigid, hollow urethane reducing the weight of the assembled system by up to 35%. The Multi-Cast flexes and cleans better than a steel-shaft system because its weight will not deform the cups away from the top of the pipe. The line is cleaned evenly and components last longer as a result of even wear. The hollow urethane shaft flexes more than steel to make tighter turns and bends with less risk of sticking.

FEATURES & BENEFITS

  • Can be configured in many different ways
  • Re-usable shaft
  • One man can easily assemble/reconfigure in minutes

SPECIFICATIONS

  • Cups
  • Wrap brushes
  • Magnets
  • Discs

RELATED

Simple Pigging System with Drop-Out

This animation demonstrates an Inline Services VIPRS pig running through a line where a JB pig receiver unit is present. Before the pig is placed in the line the valve has been closed so that no product is present behind the VIPRS pig. As the pig moves through the line the inside of the pipe is cleaned and excess product is pushed through to the destination. Once the pig triggers the magnetic pig senor and reaches the JB receiver unit, the unit is removed with the pig inside. Once the pig is removed, the receiver is returned to the pipe.

Simple Pigging System Closure

This animation demonstrates a simple pigging system closure. Inline’s VIPRS pig is positioned in the launcher as the product is run through the pipeline. At the end of the product run, the VIPRS pig is launched to remove all product from the line. The pig will trigger the indicator to alert that the pig has reached the end of the line.

Bi-Directional Pigging

This animation demonstrates Bi Directional Pigging. Inline’s VIPRS pig positioned in the launcher as product is run through the pipeline. At the end of the product run, the VIPRS pig is launched to remove all product from the line. When the VIPRS pig reaches the JB receiver, the propelling media is turned-off. When this happens the VIPRS pig is resting at the jail bar in the JB receiver; propellant is used on the receiver side of the pig to return it to the launcher.

Automated CIP System

This animation demonstrates a fully automated VIPRS bi directional pigging process system with CIP. Inline’s VIPRS pig is first positioned in the pig launcher. The product is pumped from the storage tank to the destination. The VIPRS pig is then launched to push the remaining product to the destination and captured in the VIPRS wash chamber at the destination station. Next, the CIP solution is pumped through the line to wash the chamber and pig. Finally, the pig pushes the CIP solution out of the piping and leaving the pig clean and ready for the next product run.